Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: LEDdriveDescription: LED The LT60 series Friwo LT60-42/1400 driver is a constant current LED driver that can be controlled through 1-10V analog signals, DALI, and switch dimmers. The current of this LED driver can be manually selected through the PRE DIM DIP switch, which is divided into 16 steps and can be selected from 350 to 1400mA. In addition, there is 1700mA @ 36V, which can reduce the maximum output power and compensate for the aging effects on the LED. The compact design of the constant current LED driver allows customers to adjust the output current using DALI and Push Dimm. 1-10V dimming is continuously short circuited, overload protected, overheating protected, no-load protected, power factor>0.95C, input current 300-325 mA, frequency 50-60 Hz, efficiency up to 91%, operating temperature: -20 to+45 ° C, approved CE standard IEC 61347-2-13、IEC 61347-1、EN 62386-207、EN 62384、EN 62386-102 ### Friwo LED drive92871+$901.171110+$869.551150+$865.5986100+$861.6461150+$855.3221250+$849.7886500+$844.25511000+$837.9311 -
![]()
Category: LEDdriveDescription: LED The LT10 series Friwo LT series LED driver is a complete solution with various control possibilities. These LED drivers are narrow and thin, with high flexibility in use. The LT series has voltage and current regulation in one device. These high-quality LED drivers are manufactured in Germany. Due to its compact design, it is particularly suitable for applications with limited space. High quality LED driver, made in Germany with current and voltage regulation in one device, easy to install: adjustable stress relief through screws, rivets, cable straps or clips, suitable for different wire diameters due to its compact design (only 21x30 mm cross-section), suitable for minimum profile 220-240 V input, optimized for 230 V applications with high efficiency, typical value of 83% low standby loss ≤ 0.2W overheating protection, continuous short circuit protection, overload protection, no-load protection. The equipment is easy to install and delivered with zero faults because it has passed 100% function and 3.75 kV high voltage testing. Note LT10 DB, RS stock number 794-2730, supports optional connection with DIMMBox, LED can use DALI, SwitchDIM, and 1-10 V dimming. CE, SIQ, ENEC 22 standards are recognized. IEC 61347-2-13, EN 60065, IEC 61347-1 Friwo LED driver90261+$178.469710+$173.813950+$170.2445100+$169.0030200+$168.0719500+$166.83031000+$166.05442000+$165.2784 -
![]()
Category: LEDdriveDescription: LED The LT20 UP series Friwo LT-UP LED driver has a very compact size and is designed specifically for installation in standard embedded wall mounting boxes. LT-UP LED drivers are fully sealed with a protection level of IP67, making them suitable for a wide range of conditions and environments. These 20W LED drivers are designed for constant current flow and constant voltage regulation. Both current and voltage regulation are compact designed in one device, with continuous short-circuit protection, overload protection, overheating protection, and no-load protection. Power factor>0.5C. Service life: 60000 at 35 ° C ambient temperature. Can work DC without DIMMBox connection. Input voltage: 220-240. Input current: 150 mA. Frequency: 50-60 Hz. Efficiency up to 91%. Operating temperature: -40 to+45 ° C. Recognized CE standards: IEC 61347-1, IEC 61347-2-13, EN 60065. Friwo LED driver64851+$241.496610+$235.196650+$230.3667100+$228.6867200+$227.4268500+$225.74681000+$224.69682000+$223.6468 -
![]()
Category: LEDdriveDescription: Friwo LED 驱动器 1896409, 220 → 240 V 交流输入, 12 → 24V输出, 0 → 850mA输出, 20W5600
